So when its like that, the media/gps display is fully lit too. And I would assume when it’s dark outside it would go to the dark mode, but it doesn’t. You need to turn it down a notch, so its “less lit” and then it dims all the dash and the displays by one notch, which makes the gps map turn into night mode.
I believe there are 3 settings on that brightness wheel. Rolled all the way up turns all the lights to max brightness and turns on all the interior over head lights. One notch down from that keeps daytime brightness on for the screen but turns off the over head map lights and one notch below that allows the auto dimming to occur.
Learn how to use the headlight switch in your 2018 Jeep Grand Cherokee with this easy-to-follow video. Instructions will show how to turn on your headlights,
To adjust the Forward Collision Warning settings in your Jeep Grand Cherokee, follow these steps: On the center screen of your Jeep Grand Cherokee, locate and tap the “Vehicle” option on the bottom category bar. In the top right corner of the screen, you will find the “Settings” option. Tap on it to proceed. From the left menu, select 2018. To turn off the 2018 Jeep Grand Cherokee lights there is a control knob located in the left-most corner of the dash. If You turn the knob to the position just under the hollow circle symbol the lights should turn off. Other positions from right to left are AUTO, headlights, and parking lights. If set to AUTO the headlights will 2014-2022 Jeep Grand Cherokee • Vehicle Settings 2 • Live Functions 4 Updating and Light Show Config 14 76 posts · Joined 2008. #10 · Jul 27, 2010. Same issue on my '05 WK. The radio lights and dash lights started flickering about a month ago. At times when I would turn the dimmer light all the way on, the interior lights wouldn't come on at all. Not all the time, just sporadically. To turn off blind-spot monitoring, you will need to press the button that is located on the side mirror. Once you have done this, the system will be deactivated and will no longer be in use. You may also need to deactivate the feature in your Jeep Cherokee’s infotainment system. To do this, you will need to press the “Settings” button and
2. Sheila E July 30, 2020. To turn on blind spot monitoring on a Jeep Cherokee press the Up/Down buttons on the steering wheel until Settings is displayed on the instrument panel, then press the OK button. Press the Up/Down buttons until Driver Assist is displayed, then press the OK button.Press the Up/Down buttons until Blind Spot is displayed

So it seems as if I can do a few different things. 1. Leave the lights on Auto and the uconnect setting on auto. 2. Put the dimmer switch up but not on the two highest settings and keep the uconnect on auto. 3. Leave it always on night time.

zqJF.
  • l4ubue8852.pages.dev/491
  • l4ubue8852.pages.dev/184
  • l4ubue8852.pages.dev/258
  • l4ubue8852.pages.dev/246
  • l4ubue8852.pages.dev/21
  • l4ubue8852.pages.dev/239
  • l4ubue8852.pages.dev/435
  • l4ubue8852.pages.dev/216

    • jeep grand cherokee light settings